300W Portable Power Station with LiFePO4 Battery
LiFePO4 power for outdoor use.
Key product details
The ZJBESS CY-HY-300W is a 300W portable power station with LiFePO4 batteries, 192Wh or 384Wh capacity options and 110V or 220V AC versions.
300W Portable Power Station Specifications
Review the CY-HY-300W capacity options, charging input, AC and USB outputs, dimensions and enclosure.
Choose the Right 300W Configuration
Review the intended load, runtime, charging source and destination-market version before quotation.
- Application LoadShare the equipment, rated power and any starting-power requirement.
- Runtime RequirementProvide the required operating time and expected usage pattern.
- Charging AccessConfirm whether AC, vehicle or solar charging is available.
300W Solar Generator: Panel and Load Matching
For a 300W solar generator setup, match the panel to the published PWM input and 24V maximum solar voltage. The 300W figure is total rated AC output, not expected solar production. Choose 192Wh or 384Wh for the required energy, and confirm connectors and panel scope in the quotation.
300W LiFePO4 Portable Power Station FAQs
Answers about the 192Wh and 384Wh capacity options, appliance compatibility, runtime, solar charging and choosing between different 300W portable power station designs.
Which 300W portable power station version should I choose?
The CY-HY-300W is available with a 12.8V, 15Ah battery (192Wh) or a 12.8V, 30Ah battery (384Wh). Both capacity options have 300W AC output. The catalog lists DC5521 charging connections, two AC outlets, three USB-A ports, one 18W USB-C port and two 12V DC outputs. Product dimensions are 278 × 129 × 215mm and product weight is approximately 2.8kg. The larger battery provides more stored energy; it does not increase the 300W AC output limit.
What is the difference between 300W, 192Wh and 384Wh?
The 300W rating determines the maximum continuous AC load. The 192Wh or 384Wh rating determines how much energy the power station stores.
Approximate theoretical runtime is:
| Device load | 192Wh version | 384Wh version |
|---|---:|---:|
| 30W | 6.4 hours | 12.8 hours |
| 60W | 3.2 hours | 6.4 hours |
| 100W | 1.9 hours | 3.8 hours |
| 200W | 58 minutes | 1.9 hours |
| 300W | 38 minutes | 1.3 hours |
Actual runtime will be lower after accounting for inverter losses, standby consumption, temperature, battery condition and variations in device power.
What devices can a 300W portable power station run?
A 300W portable power station can supply routers, lights, cameras, phones, tablets, small televisions, fans and laptops whose combined continuous consumption remains below 300W.
A laptop can be powered through its original AC charger, provided the total load remains within the limit. The USB-C ports are limited to 18W, so they are not suitable for directly fast-charging many higher-power USB-C laptops.
Heating and cooking appliances such as kettles, hair dryers, microwave ovens, electric heaters and most coffee makers normally exceed 300W and should not be connected.
Can a 300W power station run a refrigerator, pump or power tool?
Only if both the running power and startup surge remain within the power station’s limits.
Refrigerators, compressors, pumps and power tools can draw several times their normal power when starting. A device marked below 300W may therefore still trigger overload protection.
Because a verified surge-power rating is not yet available for these models, motor-driven equipment should be tested or reviewed individually before being approved.
Can the 300W portable power station be charged with a solar panel?
The CY-HY-300W catalog lists DC5521 photovoltaic input with PWM tracking and a maximum input voltage of 24V. Confirm the panel open-circuit voltage, operating voltage, current, connector and polarity before connection. The catalog also states that the shared input circuits must not be connected to different power sources at the same time.
Can several AC, USB and DC devices be used simultaneously?
Yes, provided the combined load remains within the relevant output limits.
The two AC outlets share a total 300W limit; they do not provide 300W each. The 12V DC outputs are rated at up to 120W total. USB output limits also apply even when the AC load is low.
On the CY-HY-300W, the second and third USB-A ports share a 15W limit. Customers requiring higher USB-C power should consider a larger model because the 300W versions provide only 18W USB-C output.
Does the 300W power station provide pure sine wave AC output?
The supplied CY-HY-300W catalog specifies 300W AC output and 110V or 220V, 50Hz / 60Hz versions, but does not specify the AC waveform. Confirm the waveform, voltage, frequency and socket configuration for the exact unit before ordering. Do not assume that one unit automatically switches between 110V and 220V.
Can the 300W power station be used as a UPS or outdoors?
UPS operation has not been verified for these models. Pass-through charging capability, transfer time and simultaneous charging-and-discharging limits must be confirmed before using the unit as backup for computers, network equipment or other interruption-sensitive devices.
The products also do not have a confirmed outdoor IP rating. They can be used for camping, photography and temporary outdoor power when kept dry, ventilated and protected from rain, standing water, excessive heat and blocked cooling vents.
Get a Wholesale Quote
Tell us what you need to power, the required runtime, charging source, quantity and destination market. We will review the suitable model before quotation.


