
10kWh Wall-Mounted LiFePO4 Home Battery
For home solar and backup.
Key product details
The ZJBESS BG10KW is a 10kWh wall mounted battery (51.2V 200Ah LiFePO4) for home solar storage and backup. One unit stores 10.24kWh, runs a 1kW load for about 8.5 hours and carries a 48V inverter up to 8kW. Built and tested in our factory in Shandong, China.
- 10.24kWh · 51.2V 200Ah · 200A continuous discharge
- 18 inverter protocols, selected on the 3.5-inch touch screen
- 8,000+ cycles at 25°C, 0.5C, 100% DOD · 10-year warranty
- Up to 15 units in parallel for 153.6kWh · 5.12kWh BG5KW option
A 10kWh battery that keeps the floor clear
The BG10KW is the wall-mounted 10kWh model in the ZJBESS home battery range. Grade A 3.2V LiFePO4 cells in a 16-series, 51.2V 200Ah pack are held with steel banding and managed by a smart BMS with a 3.5-inch touch screen, Bluetooth and Wi-Fi. The enclosure hangs on the wall next to the inverter, with the screen at eye level.
It is a battery-only product. Pair it with any 48V hybrid or off-grid inverter that uses one of the 18 built-in battery protocols, or with a ZJBESS inverter for a single-supplier system. For smaller loads there is the 5.12kWh BG5KW; for more energy without a wall, see the 15kWh floor-standing LS15KW.
- Store daytime solar for the evening peak and the night
- Keep lights, fridge, Wi-Fi and TV on through 8-hour outages
- Free the floor in garages, corridors and small utility rooms
- Grow from 10.24kWh to 153.6kWh with the same SKU
What can a 10kWh battery power?
About 8.5kWh reaches the AC loads from one full BG10KW. That covers the evening and night for a small home running essentials, or a full working day of lights, router and fridge during load-shedding.
| Average AC load | Typical loads | Runtime, 1 unit | Runtime, 2 units |
|---|---|---|---|
| 300W | LED lights, router, phone charging | 28 h | 57 h |
| 500W | + fridge, TV, ceiling fans | 17.0 h | 34 h |
| 1,000W | + laptop, freezer, water pump cycling | 8.5 h | 17.0 h |
| 2,000W | + 1.5HP inverter air conditioner | 4.2 h | 8.5 h |
| 3,000W | Whole-home daytime use | 2.8 h | 5.7 h |
How many solar panels charge a 10kWh battery? About 2.6kW of PV, or 5 × 550W panels, refills one BG10KW in a day with 5 peak sun hours (10.24kWh ÷ 5h ÷ 0.8 system factor = 2.56kW). Add the panels needed for daytime loads on top.

Wall-mounted: the battery off the floor, the screen at eye level
The BG10KW hangs beside the inverter, out of the way of cars, bikes and stored goods. Plan the wall and the lift; the wiring is the same as any 48V battery.

Check the wall
The unit weighs 86kg gross. Solid brick or concrete takes it directly. Plasterboard or light partitions need a structural fixing plan from your installer.

Lift and hang
Two installers lift the unit onto its mounting and secure it. Keep the screen at a height where the owner can read it.

Wire from below
Power and communication connect at the lower front, so cables drop straight into trunking to the inverter.
Tap. See. Control. A BMS your installers can read on site
CAN or RS485 to the inverter, Bluetooth and Wi-Fi to the ZJBESS app, and a 3.5-inch touch screen where the installer picks the inverter protocol.
Protocol Direct Select
The installer picks the inverter brand on the wall-mounted screen. No laptop or DIP switches up a ladder.
Eye-level screen
Mounted at chest height, the 3.5-inch screen lets the owner read SOC without bending down.
Cell-level alarms
Voltage and temperature of all 16 series cells, so a weak cell shows up before it becomes a claim.
Remote service
Wi-Fi monitoring lets your team read alarms and history before driving to the site.


Eight protections, set at the factory
Charging stops at 58.4V
Recommended cut-off 44.8V, BMS cut-off 40V
Continuous discharge held within 200A (BG5KW 100A)
Instant disconnect on a terminal fault
Charging blocked below 0°C
Charge and discharge stop above 60°C
Peak up to 11kW on BG10KW
Balancing and alarm per cell
Key performance advantages of the BG10KW
Rated at 25°C, 0.5C and 100% DOD with more than 80% capacity left. One full cycle a day is more than 21 years of cycling, so the 10-year warranty, not cell wear, sets the planning life.
A 1C rating on 200Ah. Carries an 8kW inverter at full output (181A at 48V, 92% efficiency). Recommended maximum load 8.2kW, ultimate peak 11kW.
Up to 15 identical units on one 51.2V bus. Energy and current add up, voltage stays the same.
The 780 × 440mm unit hangs beside the inverter, so the floor stays free for the car, washing machine or storage.
What 8,000+ cycles mean for your customer
At one full cycle a day, 8,000 cycles is more than 21 years of cycling, against 500 to 1,500 cycles for lead-acid at 50% DOD. The 10-year warranty, not cell wear, sets the planning life, and shallower daily cycles extend it further.
Steel-banded cells in a sealed wall unit
Inside the enclosure the cells are compressed and strapped with steel bands, the module process used in EV power batteries.
- Steel-banded Grade A cells. New, QR-scanned, matched cells held at constant pressure, which slows capacity fade.
- Rigid on the wall. The pack does not shift inside the enclosure, through sea freight or once it is hanging.
- Fire extinguishing system. Listed on the BG10KW datasheet as standard equipment.




Which inverters work with the BG10KW?
Protocols for 18 inverter brands are built in, so the inverter charges by the BG10KW BMS limits, not a fixed voltage.
A typical BG10KW system is one unit on a 5–6kW inverter such as the ZJBESS 6kW ED off-grid inverter, or two units on the 13.2kW hybrid inverter.
Select the protocol
On the wall-mounted screen, choose the inverter brand from the 18 built in.
Connect CAN or RS485
Run the communication cable from the lower front port down the trunking to the inverter BMS port.
Set lithium mode
Set the inverter battery type to lithium / BMS communication.
Check the readings
Confirm the inverter reads SOC and the BG10KW charge and discharge limits.
Pre-loaded for your market. Tell us the inverters you sell and our BMS engineers set the protocol before the BG10KW is crated. For a brand outside the list, send the model and firmware and we build the match.


Where the BG10KW is used

Townhouses and apartments
Where every square metre of floor counts, the BG10KW goes on the wall above the washing machine or next to the meter. One unit covers a small household's evening and night.

Load-shedding backup
Charge from the grid or solar between outages; the hybrid inverter switches the home to battery when the grid drops. 8.5kWh at the loads keeps lights, fridge, Wi-Fi and TV on for about 8 hours.

Garage solar storage
Store midday PV and run the evening peak, with the car still fitting in the garage. Five 550W panels refill one BG10KW on a sunny day.
One wall unit from 10kWh to 150kWh
Up to 15 BG10KW units run in parallel on one 51.2V bus. Distributors stock one wall-mounted SKU and quote every system size from it.
| Units | Nominal energy | At the AC loads | Continuous current | Typical system |
|---|---|---|---|---|
| 1 | 10.24kWh | 8.5kWh | 200A | Home with a 5–8kW inverter |
| 2 | 20.48kWh | 17kWh | 400A | Larger home, 10–12kW inverter |
| 3 | 30.72kWh | 25.4kWh | 600A | Home with daytime AC |
| 5 | 51.2kWh | 42.4kWh | 1,000A | Shop, clinic, small office |
| 10 | 102.4kWh | 84.8kWh | 2,000A | Multi-inverter site |
| 15 | 153.6kWh | 127.2kWh | 3,000A | Maximum parallel bank |

BG10KW limits your installers should know
10.24kWh is nominal
About 8.5kWh reaches the AC loads after the discharge window and inverter losses. We size on that figure, not the nameplate.
86kg on the wall
The wall and fixings carry the full weight. If the wall is light or uncertain, choose the floor-standing LS15KW instead.
Battery only, inverter needed
The BG10KW stores DC energy. It needs a 48V hybrid or off-grid inverter, and one unit carries up to about 8kW.
Same model in parallel
Expand only with BG10KW units. Mixing BG5KW and BG10KW, or other brands, in one bank is not supported.
Mount it where it stays above 0°C
The BMS blocks charging below 0°C. On cold outside walls, mount it inside the garage or house.
Indoors or under cover
Mount it inside or under a roof, out of rain and direct afternoon sun on a west wall.
How every BG10KW is built and tested
Every BG10KW and BG5KW passes the same eight stations in our factory in Shandong, China. Records from each station are filed under the serial number printed on the wall unit.

Incoming cell inspection
The 200Ah cells for each BG10KW are scanned on arrival and checked for voltage, internal resistance and casing damage.

Sorting & matching
Sixteen series positions are filled with cells matched by voltage and resistance, so the wall unit needs less balancing in service.

Steel-band module assembly
The 51.2V 200Ah pack is compressed and steel-banded to fit the 450mm-high wall enclosure.

BMS wiring
Sampling leads and temperature sensors are routed to the BMS behind the 3.5-inch screen and checked against the wiring map.

Wall-unit integration
Pack, BMS, breaker and screen go into the wall enclosure.

Charge–discharge aging
Each BG10KW is fully charged and discharged. Its delivered capacity and aging curve are saved under its serial number.

Final inspection & protocol
Voltage, resistance, screen and CAN / RS485 are rechecked, and your inverter protocol is set before the cover closes.

Crating & documents
The unit leaves in a UN3480 wooden crate with cables, manual and its QC pack.
Distributor terms for the BG10KW
Our published terms for distributors, installers and EPC buyers, written into every BG10KW quotation.
Standard BG10KW and BG5KW orders leave the factory within 15 working days of the confirmed order.
Your logo and colour on the BG10KW front panel and boot screen from 3 units.
Every BG10KW service request is answered within 24 hours, with a handling plan within 3 days.
About 70–80 BG10KW, or 180–200 BG5KW, fit one 20ft container in UN3480 crates. The loading plan for your order gives the final count.
Included in the BG10KW quotation
- BG10KW or BG5KW with your inverter protocol pre-loaded
- Power and communication cables, crate and installation manual
- Per-unit QC pack and configuration record
- UN38.3 test summary and MSDS for customs
Payment and order options
- One test unit for your wall and inverter trial
- Pallets of BG10KW, or BG10KW and BG5KW mixed
- Alibaba Trade Assurance or letter of credit (L/C)
BG10KW OEM and ODM under your brand
Colour, logo, boot screen, app, carton and manual change for your market; cells, BMS and tests stay the same. For a full range, pair the BG10KW with the floor-standing LS15KW, rack-mounted JJ5KW or stackable DD5KW.
Brief
Wall type, inverters, quantity
Artwork
Front-panel logo and colour proofs
Sample
One branded unit on your test wall
Production
Same eight stations and records
Inspection
Photo, video or third-party check
Shipping
Crated, documented, tracked




ZJBESS home batteries in the field
Nigeria

Philippines

United States
BG10KW and BG5KW specifications
Two wall-mounted capacities on the same BMS and LiFePO4 cell platform. The 100Ah BG5KW is rated 1C, about half the current of the BG10KW.
| Model | BG10KW · This page10.24kWh51.2V 200AhDatasheet PDF | BG5KW5.12kWh51.2V 100AhDatasheet PDF |
|---|---|---|
| Battery & energy | ||
| Nominal energy | 10.24kWh | 5.12kWh |
| Nominal capacity | 200Ah | 100Ah |
| Cell configuration | 16S LiFePO4 · 200Ah | 16S LiFePO4 · 100Ah |
| Nominal voltage | 51.2V | |
| Chemistry | LiFePO4, Grade A prismatic cells | |
| Recommended SOC window | 0–100% | |
| Internal resistance | ≤50mΩ @ 50% SOC | |
| Cycle life | 8,000+ cycles (25°C, 0.5C, 100% DOD, >80% capacity) | |
| Charge & discharge | ||
| Charge voltage (recommended / BMS cut-off) | 57.6V / 58.4V | |
| Low-voltage disconnect (recommended / BMS) | ≤44.8V / ≤40V | |
| Balancing start voltage | ≥52.8V | |
| Charge / continuous discharge current | ≤100A / ≤200A | ≤50A / ≤100A |
| Load power (recommended / ultimate) | ≥8.2kW / ≥11kW | ≈4kW / ≈5.5kW |
| Communication & expansion | ||
| Inverter communication | CAN / RS485 / RS232 | |
| Wireless | Bluetooth (app) · Wi-Fi (remote monitoring) | |
| Display | 3.5-inch touch screen | |
| Inverter protocols | 18 brands built in, selected on screen | |
| Max. parallel | 15 units | |
| Max. parallel energy | 153.6kWh | 76.8kWh |
| Environment | ||
| Temperature (charge / discharge / storage) | 0 to 60°C / −30 to 60°C / −30 to 60°C | |
| Installation location | Indoors or under cover, out of direct sun and rain | |
| Mechanical, shipping & warranty | ||
| Dimensions | 780 × 440 × 450mm (L × W × H) | 626 × 375 × 148mm (L × W × H) |
| Net weight | 86kg | 45kg |
| Fire protection | Fire extinguishing system (per datasheet) | — |
| Installation | Wall-mounted | |
| Packing | Wooden crate, UN3480 | |
| Transport and EU documents | UN38.3 test summary and MSDS with the quotation; CE EMC, RoHS | |
| Warranty | 10 years, free replacement of covered faults | |
Certificates
ZJBESS 51.2V LiFePO4 battery model families hold CE EMC certificate HTT202604749E and RoHS certificate HTT202604749R, issued by HTT in April 2026. The UN38.3 test summary and MSDS for the BG10KW come with your quotation.
BG10KW 10kWh battery FAQs
What distributors, installers and EPC buyers ask us before ordering.
How long will a 10kWh wall-mounted battery run my house?
One BG10KW delivers about 8.5kWh to the AC loads: 17 hours at 500W, 8.5 hours at 1kW or 2.8 hours at 3kW. The basis is 10.24kWh × 90% discharge window × 92% inverter efficiency. Divide 8.48 by your average load in kW for any other case. See the sizing guide.
How heavy is the BG10KW and what wall does it need?
It weighs 86kg gross and measures 780 × 440 × 450mm. Solid brick or concrete carries it directly. On plasterboard, timber frame or light block, your installer needs an engineered fixing, or choose a floor-standing model. Wall-mounted installation checklist
What size inverter can one BG10KW support?
Up to 8kW continuous. An 8kW inverter at full output draws about 181A at 48V and 92% efficiency, inside the 200A rating and the 8.2kW recommended maximum load. For a 10–12kW inverter, mount two BG10KW side by side in parallel.
Does the BG10KW work with Deye, Growatt and Victron inverters?
Yes. Those three are among the 18 brands built into the BMS, with Pylontech, Voltronic, SMA, GoodWe, Solis and others. Pick the brand on the screen and connect CAN or RS485. See our inverter compatibility guide.
Can I add a second BG10KW later?
Yes, up to 15 identical BG10KW on one 51.2V bus. Two give 20.48kWh, three 30.72kWh. Tell us the serial number of the first unit and we match the BMS version and supply the parallel cables. BG5KW and BG10KW are not mixed in one bank.
BG10KW or BG5KW: which one should I choose?
Same 51.2V platform, BMS, screen and protocols. The BG10KW stores 10.24kWh (200Ah), runs up to 8kW and weighs 86kg. The BG5KW stores 5.12kWh (100Ah), is rated 100A continuous (about 4kW), weighs 45kg and measures 626 × 375 × 148mm. BG5KW suits light walls and small backup loads.
Can the BG10KW be mounted outside?
Mount it indoors or on a covered, dry wall such as a garage or utility room, out of rain and direct sun, and remember the BMS blocks charging below 0°C. LiFePO4 charging temperature explained
How many solar panels charge a BG10KW in one day?
About 2.6kW of PV, or five 550W panels, with 5 peak sun hours (10.24kWh ÷ 5h ÷ 0.8 = 2.56kW). Add panels for the daytime loads on top.
How many BG10KW fit in a 20ft container?
About 70–80 BG10KW or 180–200 BG5KW per 20GP in UN3480 crates; the loading plan for your order gives the final count. Standard orders dispatch within 15 working days of the confirmed order.
What warranty does the BG10KW have?
10 years, with free replacement of covered faults, an answer within 24 hours and a handling plan within 3 days. The serial number on the wall unit links each case to its cell and aging records. How warranty claims work
BG10KW documents
| Document | What it shows | How to get it |
|---|---|---|
| BG10KW datasheet | Electrical ratings, temperatures, dimensions, compatible inverters | Download PDF |
| BG5KW datasheet | Electrical ratings, temperatures, dimensions, compatible inverters | Download PDF |
| Per-unit QC pack | Serial number, cell QR codes, IR matching report, aging curve | In every BG10KW crate |
| Configuration record | BMS version, inverter model and firmware, protocol and settings | With your order |
| UN38.3 test summary, MSDS, CE EMC and RoHS certificates | For customs and tenders | With your quotation |
| BG10KW manual and warranty card | Installation, settings, maintenance, claim process | With your quotation |
Guides for your sales team: sizing · inverter compatibility · rack vs wall vs floor-standing · sample acceptance test · LiFePO4 supplier checklist
Get a Wholesale Quote
Tell us your required battery capacity, application and inverter model. We will confirm the suitable configuration before quotation.







